ESS-200XIL Solar Simulator The ESS-200XIL solar simulator uses a precisely calibrated light source to simulate natural sunlight. It can be used as an indoor solar cell test system in conjunction with an IV curve tester.
ESS-200XIL solar simulator uses a precisely calibrated light source to simulate natural sunlight. It can be used as an indoor solar cell test system in conjunction with an IV curve tester.
JIS C 8912:1998 Classification of solar simulators for crystalline silicon solar cells, based on IEC 60904-9 solar simulator performance requirements.
Standard Test Condition（STC） (JIS C8912, ASTM E892, IEC 904) (1) Light intensity 1000 W/m2 (2) AM1.5 sunlight reference spectrum - Spectral distribution of incident solar luminescence at zero altitude and a sun altitude of 37°. - Atmospheric conditions: water vapor 14.2 mm, total ozone 3.4 mm, turbidity (base e, l=0.5mm) 0.27. (3) The temperature of the solar cell/module is 25 ± 2 degrees C ◎ The reference spectrum of sunlight is measured by a pyranometer or a reference cell. ◎ Spectral characteristics need to be considered.
A
B
C
Spectral matching (400～1100nm)
0.75～1.25
0.6～1.4
0.4～2.0
Long-term stability [%]
<±1
<±3
<±10
Non-uniform luminescence[%]
<±2
<±3
<±10
Technical indicators
project
Specifications
Irradiation method
Downward irradiation, tabletop
Power supply
3-phase 200V-240V 50/60Hz (Japanese standard)
Input Power
5kVA
Input Current
14.5A
light source
2500W Xenon Lamp
Average life of light source
About 1000 hours
Effective irradiation area
200mm x 200mm
Irradiance
100mW/cm 2 (300-2500nm)
Irradiance adjustment range
60 mW/cm 2 -100 mW/cm 2
Irradiance uniformity
±2% (JIS - A Class)
Light source spectral range
300-2500nm
Spectral characteristics
AM1.5
Spectral fit
JIS C 8912 Class A (400 ~ 1100nm) JIS C 8933 Class A (350 ~ 750nm)
Long-term stability
±1%(JIS-A Class)
Control method
Manual Control
Refrigeration method
Passive air cooling
Operating temperature
0 ~ 35℃
Operating humidity
10 ~ 90%
weight
Light source: 75kg Power supply: 27kg
Shanghai Sales + Technical Support + After-sales Service Center Rayscience Optoelectronic Innovation Co., Ltd address: 4th Floor, Building 122, Lane 2338, No. 1 Duhui Road, Minhang District, Shanghai Telephone: 021-34635258 021-34635259 fax: 021-34635260 E-mail: saleschina@rayscience.com
