MicronViewer 7290A Near Infrared Camera

产品详情
Contact Us

Product Model:

MicronViewer7290

Main parameters:

Up to 700 TV lines, 0.4-1.9μm spectral response, RS-170 60Hz or CCIR 50Hz video output

Downloads:

No data yet

Product Details:

MicronViewer 7290A close Infrared Camera

characteristic

• Can be connected to a variety of C-mount objectives

• Choice of 25mm high pass, low pass, band pass or ND filters

• 3-position manual or automatic gain adjustment

• Standard video output: RS170 (60Hz)

• Gen-lock input

• High performance, lead oxysulfide camera, 9.5mm×12.7mm imaging detector

Overview

Use a high quality 75ohm coaxial cable (RG-59B/U or RG-11U) to connect from the rear panel BNC connector (labeled "VIDEO OUT") to the video input device being used. The Micron Viewer 7290 can be connected directly to a closed-circuit television monitor (CCTV), or it can be connected to a frame grabber, video recorder or other video processing hardware.
Technical Parameters

Spectral response	0.4-1.9µm	Dimensions (L×W×H)	9"x 4"x 3" (22x10x7 cm)
Horizontal resolution	700 sight lines	weight	1.13kg
Dynamic Range	100:1	Install	1.0"-32 C-mount lens thread; 1/4"-20 UNC-2B tripod mounting hole The filter plate can be loaded with 25mm filters
Detector size	9.5mm×12.7mm	Ambient temperature range	-20ºC～+50ºC
Damage Threshold	1mW/cm2(CW), 10mJ (pulsed)	Operating storage temperature	-20ºC to ～50ºC; -54ºC to ～70ºC
After 50ms Decay inertness	45-60%	Gain Control	3 manual positions or automatic adjustment
Video Output	RS170	Image spot correction	Internal Control
scanning	2:1 interlaced scanning	Sensitivity	Internal Control
Signal-to-Noise Ratio	55db (pp/rms) or better	Video output connector	BNC
Distortion Deviation	Maximum 1% within the image height range Maximum 2% of image width	Sync Input Connector	BNC
synchronous	Internal/genlock	Power Connectors	4-Pin
power supply	Rated power: 6W, 500mA Voltage requirement: 12-15VDC

application

Laser beam profile measurement and analysis: Nd:YAG (1.3μm), Er:Glass (1.5μm), Ho:YAG (2.1μm)

Observe the calibrated infrared light source

Thermal imaging of objects with a temperature higher than 250°C

It can also be used for humidity detection, forensic analysis, semiconductor sub-surface detection, etc.

Shanghai Sales + Technical Support + After-sales Service Center
Rayscience Optoelectronic Innovation Co., Ltd
address: 4th Floor, Building 122, Lane 2338, No. 1 Duhui Road, Minhang District, Shanghai
Telephone: 021-34635258 021-34635259
fax: 021-34635260
E-mail: saleschina@rayscience.com

MicronViewer 7290A Near Infrared Camera

产品详情

Contact Us

资料下载