Product Information

JYS-600中文资料瞬渺-2025

PDF 0.2MB

Minority Carrier Lifetime Measurement Instrument BCT-400 Data

PDF 0.78MB

Minority Carrier Lifetime Tester-WCT-120 Information

PDF 0.73MB

NICOLET 6700 FTIR Spectrometer Operating Instructions

PDF 0.18MB

Four-probe tester information

PDF 0.41MB

Four-point probe data

PDF 0.49MB

Four-point probe 4-probe test system (resistivity, surface resistance) information

PDF 0.06MB

SBS-150 Information

PDF 0.66MB

ECV_CVP21 Information

PDF 0.24MB

ECV test principles and related analysis - Shunmiao Learning Edition

PDF 0.69MB

共 12 条

TLM FAQs

TLM Contact Resistance Tester FAQ

Is 2D or 3D camera-assisted probe positioning required?

The camera can automatically locate and insert the needle, saving a lot of engineer time. 90% Customers will choose features that include camera positioning

What is the grid line spacing to be measured?

Fixed pitch probes below 1.0mm can be customized according to customer requirements. Other range pitch probes are as follows:
1.0-1.2mm
1.2-1.8mm
1.8-2.4mm
2.4-3.0mm

Is four-probe capability required?

If the customer already has a four-probe tester, we generally do not recommend that the customer purchase it. Using the four-probe tester requires replacing the probe and test bench, which takes about 15 minutes. In addition, the cost will increase by 8,000 euros.

The temporary key has expired. How to activate a new key?

Exit TLM software first
1. Open TLM-SCAN.ini (path C:\TLM-SCANVnidat\TLM-SCAN.ini)
2. Find [Registration]Main= in the text
3. Replace the content after Main= with RJEWTM8J2FTNWMain=RJEWTM8J2FTN
Remember: Save after changing